17
GB MT
Functional description
This tool is a hot air weed killer that rea-
ches a maximum discharge temperature of
Please refer to the descriptions below for
information on how the operating elements
work.
Overview
3 Extension tube
4 Air inlet
5 Tool housing
6 Heat shield
8 Stand bracket
9 ON/OFF switch
10 Handle
11 Spatula nozzle
12 Surface nozzle
13 Restrictor
14 Grill lighter nozzle
15 Tool cable
16 Housing cover
17 Blow-off pipe
Technical specications
Electric Weed Burner ..PUV 2000 C2
...................2000 W
.............. 230 V~, 50 Hz
Safety class ......................................
II
....
Intended Use
The hot air weed killer is suitable for remo-
ving weeds between paving slabs, on plas-
and lawn areas during growth periods,
as well as for removing coats of paint, for
for reshaping and welding plastics.
It can be used to loosen adhesive joints
and to ignite charcoal.
This equipment is not suitable for commer-
the guarantee. Any other use that is not ex-
plicitly approved in these instructions may
result in damage to the equipment and
represent a serious danger to the user.
The use of the device in the rain or a damp
environment is prohibited.
The manufacturer is not liable for damage
which is caused through inappropriate use
or incorrect operation.
General description
Extent of the delivery
that it is complete:
- Electric Weed Burner
- Restrictor
- Surface nozzle
- Spatula nozzle
- Grill lighter nozzle
To Next Page
Loading...