20
GB MT
Electrical safety
accidents and injuries by an
electric shock:
-
age matches the details on the
type plate.
socket with a residual current
-
ping current of not more than
30 mA.
rainy or wet conditions.
pull the plug from the socket.
Protect the mains cable from
heat, oil and sharp edges.
the mains plug out of the socket
if the mains cable is damaged.
If the connection cable of this
device is damaged, it must be
replaced by the manufacturer
or their customer service or by
order to avoid hazards.
mains cable to the power sup-
ply. Do not touch a damaged
mains cable as long as it is
connected to the power supply.
A damaged mains cable can
result in voltage-carrying parts
being touched.
Additional safety
information
and health risks:
-
move the mains plug from the
socket.
dryer
people or animals.
nozzle opening on the blow-off
pipe.
is hot.
socket when not in use as well
as when taking a break from
working or while carrying out
work on the device, e.g. chang-
ing the nozzle.
nozzle outlet and the surface or
workpiece you are working on.
The device could overheat.
clean, dry and free of oil or lu-
bricating greases.
To Next Page
Loading...