Parkside PWD 12 A1 User Manual

GB IE
NI CY
6
Functional description
The wet and dry vacuum cleaner is
equipped with a robust plastic container
for waste collection. The castors make the
appliance very easy to manoeuvre. The
suction ow is switched off by a oat dur-
ing wet vacuuming once the waste tank is
full. The appliance is also equipped with a
blower function.
The following describes the function of the
operating parts.
Pictograms regarding the
use of nozzles and lters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth surfaces
and hard oor surfaces.
Nozzle to vacuum dust and dirt
from joints and cracks.
Specic nozzle to vacuum cushions
and mattresses.
Specic nozzle to clean the car.
Filter to absorb liquids.
Filter not suitable to absorb liquids.
Filter to absorb dry dirt from the
house, garage and workshop.
Filter to absorb ne dust e.g. stone
dust or wood dust.
Technical data
Wet & dry
vacuum cleaner............PWD 12 A1
Rated voltage U ...220-240 V~, 50/60 Hz
Rated power input
(Power consumption) P ............... 1200 W
Safety class ......................................
II
Protection category................... IPX4 *
Suction force ............................ 180 AW
Mains cable length ........................... 4 m
Waste tank capacity (gross)............... 12 l
Usable container volume (water) ........12 l
Weight (incl. all
accessories) ........................ approx. 4 kg
* Plug for indoor use only.
Technical and visual modications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.

Parkside PWD 12 A1 Specifications

General

Power	1200 W
Capacity	12 l
Hose Length	1.5 m
Frequency	50 Hz
Voltage	230 V
Dust Bag Capacity	N/A (bagless)