Parkside PWD 12 A1 User Manual

GB IE
NI CY
5
General description
The illustration of the principal
functioning parts can be found on
the front and back foldout pages.
Contents
Unpack the appliance and check that it is
complete. The appliance is supplied with
the motor head tted (
1). To remove the
motor head, open
the securing clips
( 8).
Dispose of the packaging material properly.
1 Motor head
6 Waste container
7 4 feet with castors and acces-
sory ttings
12 3-part vacuum tube
13 Vacuum hose with handle
15 Foam lter
16 Material lter (already mounted)
17 Paper lter bag
18 Floor nozzle with
19 turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces (already mounted)
20 Crevice nozzle
- Instruction Manual
Overview
Housing
1 Motor head
2 Carrying handle
3 On/off switch
4 2 attachment ports for accesso-
ries
5 Suction connection
6 Waste container
7 4 feet with castors and acces-
sory ttings
8 2 locking clips
9 Blower connection
10 Mains cable
11 Cable clip
Accessories
12 3-part vacuum tube
13 Vacuum hose with
14 Handle component
Filter
15 Foam lter for wet vacuuming
16 Material lter for dry vacuuming
(already mounted)
17 Paper lter bag to vacuum
coarse dirt
Nozzles
18 Floor nozzle with
19 turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces (already mounted)
20 Crevice nozzle
21 Filter basket
22 Intake connections
23 Sealing ring
24 Lip on the suction pipe
F
25 Holder for mains connection ca-
ble

Parkside PWD 12 A1 Specifications

General

Power	1200 W
Capacity	12 l
Hose Length	1.5 m
Frequency	50 Hz
Voltage	230 V
Dust Bag Capacity	N/A (bagless)