Parkside PWD 12 B1 User Manual (English)

Questions and Answers:

C
christopher68Jul 30, 2025
Why does my Parkside PWD 12 B1 Vacuum Cleaner have weak suction power?
- S
  Stephanie AyalaJul 30, 2025
  If your Parkside Vacuum Cleaner has weak or no suction, first check if the suction hose or nozzles are blocked and remove any obstructions. Also, check if the filter is full or clogged; if so, empty, clean, or replace it. Ensure the dirt container isn't full; if it is, empty it. Finally, check the float in the filter basket; turn the device off so the float will sink, then switch it back on.
Q
qpattersonAug 4, 2025
What to do if my Parkside PWD 12 B1 has no suction?
- B
  brooke85Aug 4, 2025
  What to do if my Parkside Vacuum Cleaner has no suction? Here's what you can check: * Make sure the suction hose or nozzles aren't blocked. * Confirm the suction pipe is correctly assembled. * Ensure the dirt container isn't open or full. * Check the filter to see if it's full or clogged.
K
kelleyrobertAug 11, 2025
Why does my Parkside Vacuum Cleaner have weak suction?
- M
  Michelle OrtegaAug 11, 2025
  Weak suction in your Parkside Vacuum Cleaner can occur for several reasons. The suction hose or nozzles might be blocked; clear any obstructions. The filter could be full or clogged; try emptying, cleaning, or replacing it. If the float in the filter basket is in an incorrect position, turn off the device to allow the float to sink, then switch it back on. Other possible causes are: suction pipe not correctly assembled, dirt container open or full.
C
cohenandreaAug 16, 2025
What to do if my Parkside PWD 12 B1 Vacuum Cleaner does not start?
- B
  bensonmeganAug 16, 2025
  If your Parkside Vacuum Cleaner isn't starting, first check that the On/Off switch is in the correct position. Then, ensure there is mains power supply by checking the socket, mains connection cable, plug and fuse. If the switch is broken or there is no mains power supply, contact a qualified electrician to fix it.
J
James McmillanAug 22, 2025
How to fix a Parkside PWD 12 B1 Vacuum Cleaner that won't start?
- A
  Amy LloydAug 22, 2025
  If your Parkside Vacuum Cleaner doesn't start, first check if the On/Off switch is turned on. Then, check the socket, mains connection cable, plug, and fuse to ensure they are working. If there are any issues, have them repaired by a qualified electrician.