Parkside PWS 125 D3 User Manual (English)

Questions and Answers:

D
david74Aug 15, 2025
What to do if my Parkside PWS 125 D3 Grinder doesn't start?
- M
  Mrs. Judith JacksonAug 15, 2025
  If your Parkside Grinder doesn't start, the possible causes include a missing mains voltage or a tripped main circuit breaker. Check the socket, mains cable, line, and mains plug. If necessary, have repairs carried out by a qualified electrician. Also, check the main circuit breaker. Another possible cause is a defective on/off switch, which requires repair by Customer Care. The engine may also be faulty.
S
Scott LamAug 18, 2025
Why is my Parkside PWS 125 D3 engine slower and stops?
- R
  Robert FitzpatrickAug 18, 2025
  If your Parkside Grinder's engine is slowing down and stopping, this could be because the device is overloaded by the workpiece. Try reducing the pressure on the grinding tool. Another cause may be that the workpiece is unsuitable.
P
Patrick CunninghamAug 21, 2025
What to do if Parkside Grinder doesn't start?
- M
  Mr. Mitchell WareAug 21, 2025
  If your Parkside Grinder doesn't start, first check the socket, mains cable, line, and mains plug. If necessary, have repairs done by a qualified electrician. Also, check the main circuit breaker. The on/off switch may be defective and require repair by Customer Care. The engine could also be faulty.
R
Rachel BellAug 25, 2025
Why does my Parkside PWS 125 D3 engine slow down and stop?
- A
  Aaron ChangAug 25, 2025
  The Parkside Grinder engine may slow down and stop because the device is overloaded by the workpiece. Try reducing the pressure on the grinding tool. Also, the workpiece might be unsuitable.
M
Mary HallAug 27, 2025
Why does my Parkside Grinder engine run but the grinding tool doesn't move?
- M
  Matthew SmithAug 27, 2025
  If the engine of your Parkside Grinder is running but the grinding tool isn't moving, it could be due to a loose grinding disc nut. You should tighten the grinding disc nut. Alternatively, the drive may be blocked by the workpiece, remaining workpieces, or remaining grinding tools. In this case, remove any blockages.
K
Kevin ThompsonAug 30, 2025
What to do if the grinding disc does not rotate smoothly and abnormal noises can be heard in Parkside PWS 125 D3?
- K
  kevin81Aug 30, 2025
  If the grinding disc on your Parkside Grinder does not rotate smoothly and you hear abnormal noises, the grinding disc nut may be loose. In this case, tighten the grinding disc nut. Also, the grinding disc may be defective, then you should change it.
D
Dawn Chang DVMSep 2, 2025
What to do if the grinding tool does not move although the engine is running in Parkside PWS 125 D3 Grinder?
- C
  Christina MuellerSep 2, 2025
  If the grinding tool of your Parkside Grinder does not move even though the engine is running, it could be that the grinding disc nut is loose. Try tightening the grinding disc nut. Another cause may be that the workpiece, remaining workpieces, or remaining grinding tools are blocking the drive. Remove any blockages.
J
Joshua KleinSep 5, 2025
What to do if the grinding tool does not move on my Parkside PWS 125 D3 Grinder?
- D
  David MaySep 5, 2025
  If the grinding tool on your Parkside Grinder doesn't move even though the engine is running, check if the grinding disc nut is loose and tighten it. Also, inspect for any blockages caused by the workpiece, remaining workpieces, or grinding tools and remove them.
P
phamiltonSep 8, 2025
How to fix a Parkside PWS 125 D3 grinding disc that doesn't rotate smoothly?
- C
  Christopher SmithSep 8, 2025
  If the grinding disc on your Parkside Grinder doesn't rotate smoothly and you hear abnormal noises, first check if the grinding disc nut is loose and tighten it. If that's not the issue, the grinding disc may be defective and needs to be changed.
V
vpetersonSep 12, 2025
What to do if my Parkside Grinder disc does not rotate smoothly and makes abnormal noises?
- K
  Katherine GomezSep 12, 2025
  If the grinding disc on your Parkside Grinder doesn't rotate smoothly and you hear abnormal noises, first check if the grinding disc nut is loose and tighten it. If the problem persists, the grinding disc might be defective and needs to be changed.