Parkside PWS 125 F6 User Manual

ANGLE GRINDER / WINKELSCHLEIFER /
MEULEUSE D’ANGLE PWS 125 F6
MEULEUSE D’ANGLE
Traduction des instructions d’origine
WINKELSCHLEIFER
Originalbetriebsanleitung
ANGLE GRINDER
Translation of the original instructions
ÚHLOVÁ BRUSKA
Překlad originálního provozního návodu
HAAKSE SLIJPER
Vertaling van de originele gebruiksaanwijzing
UHLOVÁ BRÚSKA
Preklad originálneho návodu na obsluhu
SZLIFIERKA KĄTOWA
Tłumaczenie oryginalnej instrukcji obsługi
AMOLADORA ANGULAR
Traducción del manual de instrucciones original
VINKELSLIBER
Oversættelse af den originale driftsvejledning
IAN 364873_2101

Parkside PWS 125 F6 Specifications

General

Power	1250 W
Disc diameter	125 mm
No-load speed	11000 rpm
Rated voltage	230 V
Spindle lock	Yes
Restart protection	Yes
Spindle thread	M14

Summary

Introduction and Product Overview

Intended Use

Technical Specifications

General Power Tool Safety Warnings

General Safety Warnings (Part 1)

Electrical Safety

Personal Safety

Advice on staying alert, using PPE, and proper body positioning.

General Safety Warnings (Part 2)

Application Safety Instructions

General Application Safety

Grinding and Abrasive Cutting Safety

Specific safety precautions for grinding and cutting operations.

Kickback and Operation Safety

Kickback Prevention

Explains kickback and how to prevent it during operation.

Abrasive Cutting Safety

Additional Abrasive Cutting Safety

Further safety advice specific to abrasive cutting tasks.

Accessories and Working Procedures

Permissible Accessories

Operational Safety and Usage Guidelines

Safe Handling and Operation

Instructions for securing workpiece, holding tool, reverse rotation danger, and switching off.

Grinding and Cutting Techniques

Essential Safety Alerts

Important warnings regarding PPE (goggles, masks) and general alertness.

Operation: Component Installation

Installing Guards and Handles

Instructions for fitting protective cover, blade guard, and additional handle.

Fitting and Changing Discs

Steps for safely installing and removing cutting or roughing discs.

Operation: Disc Installation and Controls

Installing Discs

Switching On and Off

Steps for safely operating the power switch and safety lock-out.