PARKZONE Spitfire Mk IX - Control Direction Test

EN
Elevator
EN
Bind your aircraft and transmitter before doing these tests. Move the controls on the transmitter to make sure the aircraft control surfaces move correctly.
After doing the Control Test, correctly set failsafe. Make sure transmitter controls are at neutral and the throttle and throttle trim are in the low position then
rebind the model to your transmitter. If the receiver loses link to the transmitter, failsafe makes the controls and throttle go to these settings made at binding.
Aileron
Rudder
Stick
Left
Stick
Right
Stick
Left
Stick
Right
Control Direction Test
Up Elevator
Down Elevator
9