Parr Instrument 6400 User Manual

15
Tables
Parr Instrument Company
104
chaPter 15
Tables
Table 15-1
Factory Default Settings
Calorimeter Operations
Operating Mode Determination
Bomb Installed/EE 1/940.0
Heater and Pump OFF
Operating Controls
Method of Operation Dynamic
Reporting Units BTU/lb
Use Spiking Correction OFF
“OTHER” Multiplier 4.1868
Calibrate Touchscreen
LCD Backlight Timeout(s) 1200 S
LCD Backlight Intensity 70%
Print Error Messages ON
Language English
Spike Controls
Use Spiking OFF
Heat of Combustion of Spike 6318.4
Use Fixed Spike
OFF
Weight of Fixed Spike 0.0
Prompt for Spike before Weight OFF
Bomb Rinse Tank Control
Report Rinse Tank Empty ON
Rinse Tank Capacity 150
# Rinses Left 150
Reset Rinse Tank Counter
Rinse Time 25
Rinse Flush Time 20
Clear Time 100
# of Rinse Cycles 3
Program Information and Controls
Date XX/XX/XXXX
Time XX:XX
Volume Level Adjust 85%
Software and Hardware Info
Settings Protect OFF
User/Factory Settings
Feature Key
Bomb Type Select
User Function Setup
Cold Restart
User/Factory Settings
User Setup ID 64-1138
Reload Factory Default Settings
Reload User Default Settings
Save User Default Settings
Calibration Data & Controls
Calibration Run Limit
10
EE Max Std Deviation 0.0
Heat of Combustion of Standard 6318.4
Bomb Service Interval 500
Use Bomb 1
Bomb 1 Through 4
EE Value 940
Protected EE Value OFF
Thermochemical Corrections Standardization
Fixed Fuse Correction ON 50.0
Acid Correction Fixed HN03, 8.0
Fixed Sulfur Correction ON 0.0

Parr Instrument 6400 Specifications

General

Brand	Parr Instrument
Model	6400
Category	Measuring Instruments
Language	English