English 4
Connecting two phones
To activate Dual Mode (multipoint) and connect two phones :
1. Tap Settings > Bluetooth.
2. Activate the Dual Mode option.
When the Parrot ASTEROID Classic is switched on, it attempts
to connect to all paired phones in the vehicle. If there are more
than two paired phones in the vehicle, the device connects to
the two phones with the oldest pairing.
When two phones are connected to the Parrot ASTEROID
Classic, one of them becomes the main phone and the other is
the secondary phone. By default, the main phone is the one
with the oldest pairing to the Parrot ASTEROID Classic.
You can receive calls (manually or through voice recognition)
to the main or secondary phones.
Only the phonebook for your main phone may be accessed
through the Parrot ASTEROID Classic. You can only make calls
using the main phone. However, you can easily switch between
the connected phones. To do so :
1. Tap Settings > Telephone > Connect phone.
2. Select the main phone.
You can also switch between the connected phones from the
main menu by tapping
Synchronising the phonebook
With most of the Bluetooth phones, the phonebook is
automatically synchronized in the system’s memory.
W arning: Only the conta cts stored in the phone memory a re
synchronized. If your conta cts a re stored in your SIM ca rd
memory, transfer them onto your phone memory.
Phone
Receiving a call
An incoming call is indicated by a ringtone. The name of the
caller is announced if his number is recorded in the
phonebook of the phone connected to the Parrot ASTEROID
Classic.
- If you want to answer the call, press the button.
Then press the button to end the call.
- If you want to refuse this call, press the button.
If the magic words are activated, you can use the voice
recognition feature to pick up and reject a call:
- The magic word « Accept » allows you to accept an
incoming call.
- The magic word « Reject » allows you to reject an
incoming call.
Magic words are activated by default. To deactivate /
activate them:
1. Press the jog wheel and select Telephone > Voice
commands > Magic words.
2. Press the jog wheel to activate/deactivate the magic
words.
To Next Page
Loading...
Need help?
General
