14
SUNSHINE SENSOR
The sunshine sensor is used to calibrate the images
depending on the sunlight. This makes it possible to
compare photos over time, despite variations in light
during shoots. The sunshine sensor is attached to the
upper part of the drone, facing the sky. During ights the
sunshine sensor is powered by the multispectral sensor.
!
It is recommended to use the SD card provided
with Sequoia. Technical performances are not
guaranteed with other SD cards.Refer to the list
of compatible SD cards on www.parrot.com/sup-
port.
Indicator light:
reference for
calibration
Position of the SD
card
Ambient light sensors
4 ambient light sensors. These sensors are tted with
band-pass lters identical to those on the multispectral
sensor.
Other sunshine sensor features:
• Inertial measurement unit.
• Magnetometer.
To Next Page
Loading...
Need help?
General