Need help?Do you have a question about the Parrot ANAFI and is the answer not in the manual?
General| Type | Quadcopter |
|---|---|
| Product color | Black |
| Housing material | Carbon |
| Maximum speed | 55 m/s |
| Frequency band | 2.4, 5 GHz |
| Number of rotors | 4 rotors |
| Maximum weight capacity | - kg |
| Maximum operating distance | 4000 m |
| Built-in processor | - |
| Memory card slot(s) | Yes |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 64 GB |
| Megapixel | 21 MP |
| Sensor type | CMOS |
| Video resolutions | 3840 x 2160 pixels |
| Maximum frame rate | 60 fps |
| Optical sensor size | 1/2.4 \ |
| Camera shutter speed | 1 - 1/10000 s |
| Image formats supported | DNG, JPEG |
| Video formats supported | MP4 |
| Field of view (FOV) angle | 84 ° |
| Bitrate at maximum video resolution | 100 Mbit/s |
| Charging time | 105 min |
| Operating time | 25 min |
| Battery voltage | 7.6 V |
| Battery capacity | 2700 mAh |
| Operating temperature (T-T) | -10 - 40 °C |
Weight and Dimensions| Weight | 320 g |
|---|
Covers transport, equipment, regulations, and flight conditions checks.
Charging, connecting, and performing initial software updates and calibration.
Standard and alternative methods for launching the drone into the air.
Configuring thermography settings, color gradients, and temperature ranges.
Setting flight boundaries, maximum height, and distance limits for safe operation.
Adjusting camera settings, horizon correction, and alignment for optimal image quality.
Controlling image brightness (EV) and exposure time (shutter speed).
Adjusting sensor sensitivity (ISO) and color temperature (WB).
Introduction to the thermal display, spectrum options, and post-processing.
Analyzing thermal videos and photos with advanced tools for detailed insights.
Default manual control and automated subject tracking modes.
Steps for diagnosing and resolving common problems, including resets.
Procedures for hard resetting the drone and its smart battery to resolve issues.
Steps to reset the Skycontroller to its default settings and firmware.
Troubleshooting connectivity problems, black screens, and white noise.
Resolving problems related to the drone not powering on or failing to take off.
Addressing synchronization problems and procedures following a drone crash.
Verifying software updates and calibrations for all system components.
Essential checks on the drone and Skycontroller before powering on and taking off.
To Next Page
