Do you have a question about the Parrot ANAFI Thermal and is the answer not in the manual?
Camera Resolution | 21 MP |
---|---|
Thermal Camera Resolution | 160 x 120 |
Max Flight Time | 26 minutes |
Max Speed | 55 km/h |
Weight | 315 g |
Max Transmission Range | 4 km |
Battery Capacity | 2700 mAh |
Type | Quadcopter |
Max Ascent Speed | 4 m/s |
Max Descent Speed | 3 m/s |
Max Wind Resistance | 50 km/h (31 mph) |
Flight Ceiling | 4500 m |
Camera Sensor | 1/2.4" CMOS |
Sensor Size | 1/2.4" |
Maximum Bitrate | 100 Mbps |
Photo Format | JPEG, DNG (RAW) |
Connectivity | Wi-Fi |
Battery Voltage | 11.55 V |
Thermal Sensitivity | <50 mK |
Operating Temperature | -10°C to 40°C |
Max Horizontal Speed | 55 km/h |
Video Resolution | 4K UHD 3840 x 2160 @ 30fps |
Gimbal | 3-axis |
Operating Frequency | 2.4 GHz |
Mobile App Compatible | FreeFlight 6 |
Thermal Camera | FLIR Lepton |
Zoom | Digital zoom up to 3x |
GPS | GPS, GLONASS |
Dimensions (Folded) | 218 x 69 x 64 mm |
Dimensions (Unfolded) | 241 x 315 x 64 mm |
Charging Time | 90 minutes |
Power on, charge battery, and download the FreeFlight 6 application.
Steps to ensure the drone and controller firmware are up-to-date.
Verifying equipment readiness, regulations, and flight conditions.
Steps for initial setup, app connection, and drone launch.
Procedures for bringing the drone back and landing safely.
Adjusting flight behavior, safety limits, and camera options.
Manual control over image brightness, sensitivity, and color temperature.
Locking exposure for consistent framing or specific areas.
Understanding thermal principles and the HUD interface.