Videos and Photos
ANAFI U SA is equipped with a 3-axis-stabilized gimbal, which delivers sharp motion and still pictures,
through two 1/2.4’’ CMOS 21MP sensors.
The lenses of the cameras include low dispersion aspherical elements, that reduce chromatic
aberrations and flare.
Although you can film and take pictures using your device as ANAFI USA’s only controller, we
recommend you always use the Skycontroller and your device, for the best controlled, most precise,
and safest filming and photos-shooting flights.
Making videos
By default, ANAFI USA and FreeFlight 6 USA are set to start recording a video as soon as ANAFI USA
takes off.
However, depending on your filming objectives, ANAFI USA and FreeFlight 6 USA offer multiple
configurable settings, from full auto to manual professional options.
If required, tap the photo/video toggle in the middle of the bottom bar of the HUD, to circle the film
camera (right icon) in white.
There are 2 main filming options accessible from the HUD of FreeFlight 6 USA.
First option:
1. Select a video mode by tapping the corresponding box of the HUD.
2. Tap a video mode to select it and tap the video mode box again to confirm your choice.
Second option:
1. Select a video resolution and a framerate (fps – frames per second) value from the
corresponding box of the HUD.
2. Tap the video settings box to call the individual video resolution and fps boxes.
3. Tap the video resolution box to access the available video resolutions and tap one to select it.
4. Tap the fps box to access the available fps values and tap one to select it.
5. Tap the video settings box again to close the sub-boxes and confirm your choices.
time-lapse video with a configurable speed factor (x15, x30, x60, x120,
x240), in 4K, 2.7K or 1080p, exported at 24, 25 or 30fps.
To Next Page
Loading...
