Parrot ANAFI How To Maintain

How to maintain the battery of the ANAFI?
Your ANAFI's smart LiPo battery is an essential element of your drone: it can power it for
a flight lasting 25 minutes. In this section, the PARROT.COM team provides some advice and
tips to maintain and maximize its lifespan.
What type of battery is fitted to ANAFI?
ANAFI is equipped with a Lithium Polymer (LiPo) battery. The latter needs to be handled and
stored in a particular way if you want to maximize its lifetime.
How to charge a new battery
A new battery, just out of the box, is charged to approximately 50 %. As with any high-
performance equipment, it is important to keep your battery in peak condition to optimize its
capacities. We therefore recommend that you systematically recharge the battery for about half
an hour after the end of your first few flights.

Parrot ANAFI Specifications

General

Type	Quadcopter
Product color	Black
Housing material	Carbon
Maximum speed	55 m/s
Frequency band	2.4, 5 GHz
Number of rotors	4 rotors
Maximum weight capacity	- kg
Maximum operating distance	4000 m
Built-in processor	-
Memory card slot(s)	Yes
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	64 GB
Megapixel	21 MP
Sensor type	CMOS
Video resolutions	3840 x 2160 pixels
Maximum frame rate	60 fps
Optical sensor size	1/2.4 \
Camera shutter speed	1 - 1/10000 s
Image formats supported	DNG, JPEG
Video formats supported	MP4
Field of view (FOV) angle	84 °
Bitrate at maximum video resolution	100 Mbit/s
Charging time	105 min
Operating time	25 min
Battery voltage	7.6 V
Battery capacity	2700 mAh
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Weight	320 g