Parrot ANAFI - Advanced Map-Based Flying; Flight Plan Creation and Execution; Touch & Fly Waypoint Navigation

82
Map-based flying modes
Flight Plan
Flight Plan enables you to fully prepare and configure your flights and filming sessions.
Tap Flight Plan from the PILOTING MODE box menu. The map of your surroundings opens full screen.
If you are not connected to ANAFI USA, the minimized live view is black.
Note: The following screenshots are from the iOS interface. The Android interface differs slightly.
1. Initial way point
7. Waypoint number
2. Waypoint altitude
8. Cameral direction
3. Plan options
9. Waypoint distance marker
4. Saved flight plans
10. Slider
5. Piloting mode box
11. Current waypoint
6. Undo/Redo
Parrot recommends that you modify the settings of the flight plan before you begin. Tap PLAN
OPTIONS. A new window opens with 2 options:
PLAN OPTONS
Landing on last way
No/Yes
Choose if the drone lands on the last waypoint, or if the
drone hovers.
Automac progressive course
No/Yes
Choose if the drone stops briey at each waypoint, or if the
drone transions smoothly from waypoint to waypoint.
Tap on the FLIGHT PLAN box, a window opens. Tap New.
Choose the location of your initial waypoint, ideally, very close to your intended take-off point. Tap
the screen to create the waypoint. The waypoint appears as a green circle. The white figure in the
center represents the drone altitude, and the white arrow represents the camera direction.