Camera Calibration
Correct horizon (exceptional procedure)
Note: Your ANAFI USA’s camera has been factory-calibrated with high precision.
Unlike the calibration of ANAFI USA or that of the Skycontroller, which must be performed
periodically, the camera calibration must not be performed unless it appears necessary, typically, after
a crash. If you notice a tilted horizon on all your videos and photos, and if this tilt is always on the same
side, access camera calibration to make your horizon perfectly straight again.
This feature is accessible from the ANAFI USA box on the FreeFlight 6 USA homepage (or from the
ANAFI U SA box of the HUD) and from the PREFERENCES / Camera menu.
Before starting this procedure, you must position ANAFI USA on a flat and perfectly level surface,
exactly perpendicular to any pattern containing straight lines you can use as horizon references. A set
square can help you check that a line on your floor is perpendicular to your wall.
When ANAFI USA is correctly positioned, perpendicular to its straight horizon reference, press
Power to power it on, along with the Skycontroller and your device.
Access Camera calibration from the ANAFI USA box of the homepage or the HUD of FreeFlight 6 USA,
or from the PREFERENCES / Camera menu.
Select the Correct horizon option from the following screen.
ANA F I USA: gimbal/camera calibration (Android)
To Next Page
Loading...
