Parrot ANAFI - Preferences and Customization

46
Preferences
Tap Settings on the top right of the homepage, or the HUD, to access PREFERENCES. Preferences
enable you to fine-tune ANA FI USA to customize it to your piloting and filming styles. Access
Preferences submenus from the tiles on the left of the screen.
For all items, default values (DV) are marked in bold characters.
Controls
The Controls preferences set the way the Skycontroller behaves. It also enables you to activate the
Hand-launch option.
Tap an item option to select it. When you select an option, the icon turns from white to green.
Controls PREFERENCES
Control mode
CLASSIC / ARCADE (only available in flight)
Options:
Inverse joys
OFF / ON
Special
OFF / ON
EV Trigger
OFF / ON
Hand-launch
NO / YES
Note: If you activate the EV Trigger, you control the EV (exposure value) directly from the zoom (right)
trigger of the Skycontroller (refer to the “Presentation of Skycontroller 3” or the “Presentation of
Skycontroller 4” section of this guide for more information). With this setting, you can manually modify
your EV from -3.0 to +3.0 by increments of 0.3, which automatically impacts the shutter speed (“s”
value) of the camera.
Tap RESET ALL CONTROL PREFERENCES to reset Controls preferences to the default values.
Presets
The Presets preferences allow you to adapt the flight behavior of ANAFI U SA for the four modes:
- FILM, SPORT, CINEMATIC and RACING
Presets PREFERENCES
Global reactivity
1% to 100% (DV: 100% for FILM, and SPORT; 15%
for CINEMATIC; 30% for RACING)
Gimbal:
Horizon
FIXED / DYNAMIC (DV: FIXED for FILM, and
SPORT; DYNAMIC for CINEMATIC, and RACING)
Camera tilt speed
1°/s to 180°/s (DV: 20°/s for FILM, SPORT, and
RACING; 10°/s for CINEMATIC)