29
ENGLISH
RETRIEVING PHOTOS
During the flight, if no SD card is inserted, photos are
stored on the internal memory of the multispectral sensor.
VIA AN SD CARD
1. Insert your SD card into an adapter which is
compatible with your computer.
2. Retrieve the photos taken during the flight.
Do not remove the SD card when the drone is turned
on.
VIA WI-FI
1. Power the drone on, connect to the
Bluegrass_XXXX Wi-Fi, and enter the
192.168.42.2 IP address in your Web browser:
Sequoia automatically turns on.
2. Go to the Gallery tab and retrieve the photos taken
during the flight.
To Next Page
Loading...
