RETRIEVE PHOTOS
During the ight, if no SD card is inserted, photos are
stored on the internal memory of the multispectral sensor.
VIA AN SD CARD
1. Insert your SD card into an adapter which is
compatible with your computer.
2. Retrieve the photos taken during the ight.
Do not remove the SD card when the drone is turned
on.
VIA WIFI
1. Connect to the Bluegrass_XXXX Wi-Fi and
enter the IP address 192.148.42.2 into the Web
browser Sequoia automatically turns on.
2. Go to the Gallery tab and retrieve the photos taken
during the ight.
DATA PROCESSING WITH
AIRINOV FIRST+
Go to http://parrot.airinov.com and follow the on-screen
steps for processing your data.
For more information go to www.parrot.com/support.
However, the images retrieved by Sequoia can be
processed in several ways.
To Next Page
Loading...
Need help?
General