Parrot CK3100 Installation Manual

GOLF VI
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the
authorisation of Parrot SA. Pictures for information only.
5 6
Using the plastic trim tools,
unclip the car stereo and air
conditioning surround.
Unplug the connector for the
airbag warning light.
1 2
3
4
4
5
1
3
2
4
Disassembly 1 / 3
Release the panel by inserting the
plastic trim tools underneath.
Remove screws 1 and 2.
Unclip the cabin light and
disconnect it.
Using the plastic trim tools,
unclip the vanity light from the
left-hand side.
Remove screws 3, 4, 5 and 6
around the car stereo.
Disconnect the connector and
the aerial cables.

Parrot CK3100 Specifications

General

Product color	Black

Weight and Dimensions

Dimensions (WxDxH)	72 x 43 x 15 mm