Parrot Mambo FPV User Manual

13
ENGLISH
CONNECTING THE
CAMERA TO THE PARROT
MAMBO FPV
1. Connect the Camera to the Parrot Mambo FPV.
2. Launch FreeFlight Mini on the smartphone and
connect the app to the drone.
> On iOS: the app prompts you to enable Wi-
Fi to connect the smartphone to the Parrot
Mambo FPV. The name of the Wi-Fi network
is: MAMBO_XXXX.
> On Android, the app will be able to locate
and connect to the Parrot Mambo FPV. A
pop-up window may appear to confirm the
connection to the camera's Wi-Fi network.
Otherwise, manually connect the smartphone
to the camera's Wi-Fi network.
3. The video appears on the FreeFlight Mini app
home page.
> To record the Parrot Mambo FPV video, insert
a micro-SD memory card into the connector
on the back of the camera before installing it
in the Parrot Mambo FPV.
> The recorded videos are in HD 720p format.

Parrot Mambo FPV Specifications

General

Type	Quadcopter
Easy to use	Yes
Certification	CE
Product color	Black, White
Construction type	Ready-to-fly (RTF)
Maximum speed	- m/s
Number of rotors	4 rotors
Bluetooth version	4.0
Integrated sensors	Infrared (IR) sensor
Maximum flight time	10 min
Maximum weight capacity	- kg
Number of gyroscope axis	3
Maximum operating distance	100 m
Number of obstacle sensors	1
Number of propeller blades	2
Operating system installed	Linux 2.6.32
Megapixel	- MP
Maximum frame rate	60 fps
Supported video modes	720p
Live view frequency band	2.4 GHz
Maximum video resolution	1280 x 720 pixels
Field of view (FOV) angle	120 °
Built-in processor	-
Memory card slot(s)	No
Flight modes	Aerial Photography (AP) mode, Follow Me mode, Smart mode, Tracking mode
Moving control functions	Backward, Downward, Flying sideways, Forward, Turn left, Turn right, Upward
Charging time	30 min
Battery capacity	660 mAh
Transmitter battery capacity	200 mAh
Cables included	USB
Motor type	Brushless

Weight and Dimensions

Width	180 mm
Weight	63 g
Transmitter weight	295 g