Parsun F15/F9.9BM User Manual

2. Paint anti-corrosion grease on the propeller shaft.
Cooling water passage
1. Inspect cooling water passage, if blocked, clean it.
1. Cooling water passage inlet
1
2. Place the outboard engine in the water and ensure the water level is above the anti-vortex plate, then
start the engine.
3. Check if water overflows at the cooling water checking hole. If there is no flow or intermittent
flow, check the cooling water passage.
1
2
1. Cooling water inlet 2. Cooling water checking hole
21

Parsun F15/F9.9BM Specifications

General

Brand	Parsun
Model	F15/F9.9BM
Category	Engine
Language	English