Need help?Do you have a question about the ParTech OxyGuard Handy Polaris and is the answer not in the manual?
General| Brand | ParTech |
|---|---|
| Model | OxyGuard Handy Polaris |
| Category | Measuring Instruments |
| Language | English |
Procedure for calibrating the dissolved oxygen meter.
Function to set the salinity of the water being measured.
Allows setting of language, temperature units, and oxygen units.
Select and change the language of the instrument display.
Choose between Celsius (°C) or Fahrenheit (°F) for temperature display.
Option to select between mg/l and PPM for oxygen measurement.
Configure the auto-shutdown timer for the meter.
Adjust the brightness of the display backlight.
Displays firmware version and serial numbers for probe and instrument.
Lists error conditions if they occur.
Instructions and illustration for replacing the instrument's battery.
Detailed steps for renovating the dissolved oxygen probe, including cleaning.
Address and required information for sending equipment for repair or service.
To Next Page
