Need help?Do you have a question about the ParTech 740 and is the answer not in the manual?
General| Brand | ParTech |
|---|---|
| Model | 740 |
| Category | Measuring Instruments |
| Language | English |
Overview of the 740 Monitor's purpose and basic user interface capabilities.
Details the monitor's display features, including large numerals, status line, backlight, and contrast.
Describes the six-key tactile membrane keypad for configuration and operation.
States the monitor's compatibility with the Partech Soli-Tech 10 (ST10) sensor.
Explains the manual's conventions, dimensions, and target audience's assumed knowledge.
Instructions on powering the 740 Monitor on and off using the ON/OFF key.
Explains the normal operating mode and how the display updates with sensor input.
Details the monitor's measurement cycle frequency and response time.
Discusses how display resolution and units are set by the user for the monitored parameter.
Introduces the concept of user-definable profiles for storing configuration and calibration data.
How to access and navigate the instrument's main menu for settings.
Describes the three methods used for entering data and configuring parameters.
Explains the use of preset measurements to speed up new profile creation.
Provides an example of how a 740 Monitor can be configured with different profiles.
Guide to choosing and activating a previously configured profile from the main menu.
Explains the navigation keys (MENU, ➔, ←, OK) within the profile wizard.
Outlines the sequence of configuration steps within the new profile wizard.
How to set and edit the name of a profile for clear identification.
Process for assigning a user name to a profile for record-keeping.
Instructions for setting or changing the date associated with a profile.
Option to use lookup tables for improving linearity with non-linear sensor outputs.
Describes adjusting X values for linearisation via lookup tables.
Describes adjusting Y values for linearisation via lookup tables.
Details the role of constants A, B, C in measurement calculations.
How to turn the monitor's audible bleeper on or off.
Configuration options for the display backlight, including auto-on duration.
Setting to automatically turn off the instrument after a period of inactivity.
Procedure for selecting the instrument's operating language.
Steps to change the user password for instrument security.
Importance of calibration and general preparation for accurate measurements.
Overview of primary and secondary methods for calibrating the monitor.
Displaying details of the currently active profile for user reference.
Information on the instrument's software version and serial number for diagnosis.
Provides contact details for Partech (Electronics) Ltd for support.
Information on the battery's charge level, voltage, and charger connection.
Diagnostic information about sensor performance to aid in troubleshooting.
How to lock the instrument to prevent access to configuration menus.
Procedure for changing the user password to enhance security.
Details errors related to measurement values exceeding or falling below display range limits.
Covers various sensor-related faults like no sensor, low/high input, or general sensor faults.
Details the Nickel Metal Hydride battery pack and its charging characteristics.
How to use the mains or car charger and interpret the charging LED status.
Step-by-step instructions for safely replacing the sensor unit.
Address and information required for sending equipment back for service or repair.
Power supply, charge input, and EMC conformity details.
Enclosure material, dimensions, weatherproof rating, and weight.
Number of profiles, preset calibrations, units of measurement, and display ranges.
Safety guidelines and precautions when handling chemicals for standard preparation.
Detailed steps for mixing chemicals to create the Formazin turbidity standard.
How to prepare lower concentration Formazin solutions from the standard.
To Next Page
