740 Portable Suspended Solids
9 Monitor Config
9.1 Bleeper
This option allows the bleeper to be turned on or off, a small tick indicates the current
setting. To change the bleeper setting, use the keys to select the required setting
and press OK. Press MENU to exit the bleeper menu.
9.2 Backlight
The backlight can be set to one of two modes, On after key press (the backlight stays
on for 5 seconds after a key is pressed) or Off. The current backlight mode is indicated
by a small tick, to change the backlight mode, use the keys to select the required
mode and press OK. Press MENU to exit the backlight menu.
9.3 Auto Shutdown
The Auto Shutdown menu allows the user to set whether the instrument automatically
switches itself off. When set to On, the Auto Shutdown feature switches the instrument
off 5 minutes after the last key press thus prolonging battery life. When set to Off, the
instrument will continue operating until switched off by the user or the battery is fully
discharged.
Note: If the instrument has switched off automatically, the user can restore
operation by pressing the ON/OFF key.
9.4 Language
This facility is used to select the operating language of the instrument and is configured
using the list select method of data entry. The 740 Monitor is supplied with a choice of
English and one other language.
9.5 Change Password
The user password used when the instrument is locked and unlocked can be adjusted
using this menu. The first stage in changing the password is to enter the existing
password, which is done using the keys. Once the old password has been
entered, press the OK key to proceed to the next stage, which is the entry of the new
password. The new password can be entered using the keys and pressing the
OK key will store the new password. At any stage whilst the password is being
changed, pressing the MENU key will exit the menu and the old password will be
unchanged.
172430IM-Iss07.odt 172430IM-Iss07 Issue Date 23/10/2014 Page 23 of 46
To Next Page
Loading...
Need help?
General
