To Next PageTo Next PageHow to fix a Partner BC 435L Trimmer that won't start?
If your Partner Trimmer won't start, several issues could be the cause. First, ensure you are following the correct starting procedures as outlined in the User Manual. Other potential causes include a fouled spark plug (clean, gap, or replace it), a plugged fuel filter (replace it), or an incorrect carburetor mixture adjustment setting (have it adjusted by an Authorized Service Center).
Why does my Partner BC 435L Trimmer start but have low power?
If your Partner Trimmer starts but the engine has low power, check the following: Ensure the choke lever is in the RUN position. A dirty spark arrester screen or air filter can also cause this issue; replace the spark arrester screen and clean/reinstall the air filter. If these steps don't resolve the problem, the carburetor mixture adjustment setting may be incorrect, and you should have it adjusted by an Authorized Service Center.
What to do if Partner Trimmer engine hesitates?
If your Partner Trimmer engine hesitates, the issue might be an incorrect carburetor mixture adjustment setting. It is recommended to have your carburetor adjusted by an Authorized Service Center.
Why is my Partner BC 435L running erratically?
If your Partner Trimmer is running erratically, the spark plug might be incorrectly gapped. Try cleaning, gapping, or replacing the spark plug.
How to stop my Partner BC 435L Trimmer from smoking excessively?
If your Partner Trimmer is smoking excessively, the carburetor mixture adjustment setting may be incorrect. Have the carburetor adjusted by an Authorized Service Center.
Follow all warnings and instructions regarding operation and blade installation. Avoid blade thrust and thrown objects.
Instructions on what actions to avoid during operation, refueling, and maintenance to prevent damage or injury.
Details on safety features such as the cutting attachment guard and muffler shield to prevent injury.
Step-by-step guide to install the "Loop With Barrier" handle onto the unit for BC 435L model.
Step-by-step guide to install the "Bullhorn" handle onto the unit for BC 435B model.
Instructions on how to attach cutting implements like the trimmer head or blade to the unit.
Instructions on how to properly install the cutting attachment guard for safety.
Steps for installing the cutting head onto the drive shaft of the trimmer.
Detailed instructions for safely installing a blade onto the cutting attachment.
Guidelines for safely refueling the unit with the correct type of unleaded gasoline.
Procedure for draining and replacing used engine oil.
How to check the engine oil level before operation.
Details on the recommended type and viscosity of engine oil to use.
Instructions on how to properly attach and adjust the shoulder harness.
Step-by-step guide for starting the engine when it is cold.
Procedure for starting the engine when it has recently been running.
Specific steps for starting the engine in cold weather conditions.
Instructions on how to safely shut down the engine.
Extra safety advice specific to trimming operations.
How to release and advance the cutting line using the bump feed mechanism.
Techniques and methods for effective trimming of grass and weeds.
Guidelines for safely using blades for cutting tougher vegetation.
Specific advice for using weed blades for cutting grass and light weeds.
Instructions for using a brush blade for tougher growth and brush.
Steps to replace the trimmer line when it's depleted.
Instructions for cleaning or replacing the air filter.
Procedure for accessing and replacing the fuel filter.
How to sharpen the knife on the cutting attachment guard.
Guidance on adjusting the carburetor for optimal performance.
Information on spark plug gap and installation.
Steps to prepare the unit for operation after a period of storage.
General
