Power switch on/off
The power button locates on the button pad on the left handlebar. Pressing and holding
the button to switch on/off.
Power assist level setting
Setting a power assist level 1,2 or 3 by pressing "+" or "-" button.
Thumb throttle
The thumb throttle locates on the button pad on the right handlebar. The thumb throttle is
valid in 1,2 or 3. The deeper you press down the throttle, the much power you can get.
You can set power assist level 0 to turn off the throttle.
Head light switch on/off
Press the head light switch/up button on the button pad on the left handlebar.
Multi-function button
Press the multi-function button to change the display index of riding.
The shifter
Push the lever to let gear up. Press the button to let gear down. (Notice: please shift the gear when
the rear wheel is rotating. Gear shifting when the rear wheel stops may damage the components.)
The pedals
Setting power assist level 0 or 1 with the speed of 14mph made by pedal can charge the
battery manually.
Cruise control system and walk-power assist
Holding "+" button for 5-8 seconds, cruise control system will start.
Press and hold "-" button, the bike will keep in the speed of 3.7mph to help you easily
to walk with the bike.
8
Usage Guidance
www.paselec-ebikes.com
To Next Page
Loading...