3. Warranty and safety instructions
Read these instructions carefully before using the product:
- Warranty will be void, if the product is used in any ways that is in contradiction
with the instructions given in this manual.
- Warranty will be void if the seismograph has been tampered with.
- The device must be used only according to the instructions described in this
manual. Faultless and safe operation of the device can be guaranteed only if the
transport, storage, handling and operation of the device is appropriate.
- To prevent damage, use only original accessories or approved by PASI srl.
- The box is waterproof only if closed. When a suitable location has been selected
for the seismograph, it must be ensured that no water can get into the device under
any conditions. Direct sunlight is also to be avoided for long period. It is not
recommended that the seismograph is installed on a strongly vibrating surface.