PART
10
PASMO
PASMO OPERATION MANUAL
PASMO
PROBLEMS AND SOLUTIONS：
PLEASE OPERATE THE MACHINE CORRECTLY
1. Refrigerating fluid leakage
3. Condenser is dirty
4. Circumstance temperature is too high.
5. The space for radiating is not enough
1. Hardness set too high
2.Incorrect Air/Mix
ratio
3. Not enough Mix in cylinder
1.
Set high hardness, incorrect ratio for ingredients or
dispense speed is far faster than input speed lead to cylinder
frozen
2.Check if the machine drive system is working correctly
THE MACHINES DISCHARGE
DISCONTINUOUSLY OR
CAN’T DISCHARGE：
1.The ground wire was connected incorrectly
2.Short circuit inside of machine
MACHINE STATIC
ELECTRICITY:
1. The internal breaker switch is in the off position
2. Electric board or screen may be broken broken
3. Electric board and screen are not connected correctly
4. Power is not correct or correctky the diameter is too small
MACHINE DOESN'T WORK
WHEN CONNECTED TO
ELECTRICITY:
To Next Page
Loading...
