Need help?Do you have a question about the Pathos Acoustics AURIUM and is the answer not in the manual?
General| Type | Headphone Amplifier |
|---|---|
| Signal-to-Noise Ratio | >90 dB |
| Frequency Response | 10 Hz - 80 kHz |
| THD | <0.1% @ 1W |
| Input Impedance | 100 kOhms |
| Inputs | 1x XLR |
| Outputs | 1x RCA (Pre Out) |
| Dimensions | 200mm x 240mm x 80mm |
Lists items included in the package.
Instructions for handling and storing packaging.
Guidance on where to position the unit.
Information on ventilation and cooling.
Details on tube type and replacement.
Recommended warm-up period for optimal performance.
Procedures for cleaning the unit.
How to obtain service or repairs.
Initial setup steps before operation.
Terms and conditions of the product warranty.
Overview of unit's ports and user interface elements.
Connects power supply and turns the unit on.
Details on the 4 available audio inputs.
Describes the audio outputs for external amplifiers.
Adjusting volume, gain, and balance for headphones.
Detailed technical parameters of the Aurium amplifier.
To Next Page
