Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
Sku Number: 356-9243/9244
INDUCTION LAMP
Model Number: E6956W/E6956BZ
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
• Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off
circuit breaker).
• Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any
surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from
electric shock.
CAUTION
• All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC). Contact your
municipal building department to learn about your local codes, permits and/or inspections.
• Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC. Consult a qualified electrician before
installation.
• Only general ON/OFF wall switch applys for this fixture, the dimmable wall switch shoudn’t be required.
Maximum Wattage: 29 W
Working Temperature Range: -4
0
F ~ 113
0
F
Page 1 of 9
PACKAGE CONTENTS
AA
BB
DD
CC
EE
HARDWARE CONTENTS Note: Hardware not shown actual size.
A
B
C
D
Mounting Screw
X2
Mounting Bracket Screw
Fixture Mounting Screw
Mounting Strap
Decorative cover
#8/32X1/2 in
#6/32 X1/2 in
#10/24 X1/4 in
To Next Page
Need help?
General
