Patron D-145 - Adjustment Cycles and Display

4
setting range is from 0 to 24 hours. If you set the timing data as “00”,it
will cancel timing function ,the timing indicator will turn off
Add Button: Press the Add button to increase humidity data
or increase timing data .
When setting the humidity data , press the button for one time to increase
5%RH , you can set the humidity range from 10%-90% RH, and 5% RH
for one step , it will cycle as below :
10%-15%-20%-25%-30%-35%-40%-45%-50%-55%-60%-65%-70%-
75%-80%-85%-90%-10% …
When setting the timing data , press the button for one time to increase 1
hour , you can set the timing range from 1-24 hours ,and 1 hour for one
step. it will cycle as below:
01-02-03-04-05…-23-24-00-01-02…
Minus Button: Press the Minus button to decrease humidity
data or decrease timing data .
When setting the humidity data , press the button for one time to decrease
5%RH , you can set the humidity range from 90%-10% RH, and 5% RH
for one step , it will cycle as below :
90%-85%-80%-75%-70%-65%-60%-55%-50%-45%-40%-35%-30%-
25%-20%-15%-10%-90% …
When setting the timing data , press the button for one time to decrease 1