7
AUTO DRAINAGE &MAINTENANCE
Please disconnect the power supply before cleaning or
conducting maintenance.
Auto Drainage: Connect water hose (≤13.12 ft length) to the water
drainage hole by quick connector, the machine will automatically drain by
water pump through water hose when operating
Cleaning: Clean the unit body with a soft damp cloth. Do not submerse or
place water on the unit or control panel. Water may damage the electronic
components of the unit. Do not use chemical solvent such as benzene,
alcohol, gasoline or other heavy-duty cleaner. The surface may become
damaged or deformed.
Cleaning the Air Filter:
Step 1: Pull out the air filter gently.
Step 2: Use a vacuum cleaner to remove the dirt on the surface of the air
filter. If the air filter is exceptionally dirty, immerse it gently into warm
water (about 104℉) with a neutral detergent, rinse and dry it thoroughly.
Step 3: Insert the filter back into the unit.
Dehumidifier Storage:
1. Push the purge button to empty the water before transportation or storage.
2. Transport and store the machine upright.
3. Stack machines in warehouse to save space.
TROUBLE SHOOTING GUIDE
To Next Page
Loading...