5
11hour , it will cycle as below:
24-23-22-21-20…-02-01-00-24-23…
Purge Button (Manual Drainage): Press and hold the
purge button for 3 seconds, the machine will drain the water
automatically by the built-in pump. After 30 seconds, the pump stops
draining, then the indicator will turn off.
Defrosting Indicator: When the machine is defrosting, this
indicator turns on. After defrosting, it turns off
Water Full Indicator: When the water pump is full of
water, the indicator light turns on to remind the user to drain
Display Screen: The default temperature
display is Fahrenheit temperature. When the
machine is in standby mode, press the power
button for 5 seconds to switch to Celsius temperature. When the machine
is running, it shows the temperature and humidity of the inlet air and
outlet air. It displays the running time when it is in running mode; and
displays the setting timing and setting humidity data when users set
To Next Page
Loading...
