To Next PageTo Next Page
Need help?Do you have a question about the Paul BUS and is the answer not in the manual?
General| Communication Protocol | Wi-Fi |
|---|---|
| Power Supply | 24 VAC |
| Operating Temperature | 0°C to +40°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Control Accuracy | ±0.5°C |
| Installation | Wall-mounted |
Electrical connections must be executed by professionals according to DIN-VDE standards.
Details the frost protection mode, including heater integration and sensor placement.
Covers the electric frost protection heater, its integration, and power limits.
Describes the configuration for PTC heating elements, excluding flow indicators.
Details the configuration for resistance heating elements, requiring a digital flow indicator.
Covers brine-defroster integration, sensor placement, and pump actuation.
Details the supply heater operating mode, including fan control and temperature settings.
Describes the electric heater battery, its control via room thermostat, and duct temperature regulation.
Explains the electric heater battery with resistance heating, requiring a digital flow indicator.
Details water supply heater installation, pump control, frost protection, and proportional valve regulation.
Describes the ground pipe diverter for heat exchangers, its functions, and servomotor control.
