22 23
User and installation instructions
EN – Installer information
Mounting the cover on the wall frame
The fan is double insulated and must not be
earthed. When the electrical connection has been
completed, place the cover back over the wall frame
by tting the hook in the wall frame in the hole in the
cover (Figure O).
P.
Q.
O.
0
1
0
1
S.
R.
Next, close the cover over the wall frame (Figure
P). Ensure the catch the screwdriver is pointing to
(Figure Q) engages properly.
Make sure that the cover is rmly seated in the
hook on the wall frame and latch by gently pulling
the cover.
Finally, put the motor unit in place (Figure R). Be care-
ful when putting the motor unit in place. The legs and
the impeller can be damaged if the unit is forced in
at an angle. A distinct ‘click’ sound conrms that the
unit is in place. Check that the impeller rotates freely
before switching on (Figure S).
User and installation instructions
For the user – EN
Basic setting:
Pax Calima is programmed to cope with the vast
majority of installations.
The fan works continuously with a basic ow of
approximately 30 m³/h. When the light changes,
when a light is switched on or when shadows
change when someone moves in the room, the
ow increases to approximately 60 m³/h.
If the humidity rises rapidly, for example when the
shower is on, the fan goes up to maximum ow at
approximately 95 m³/h.
When the humidity has been removed, the fan re-
verts to the basic ow of approximately 30 m³/h.
If other settings or functions are desired, down-
load the Pax app from the App Store or Google
Play.
Technical requirements for Pax app
Apple devices iOS 7 or Android OS 4.3 or later
with support for Bluetooth 4th.
Fault indication:
Red LED on the fan indicates power failure when
the calendar function has been activated.
Reset by syncing the app with the fan.
Learn more about all the possibilities with our
app at www.pax.se
Pax Calima®
Automatic functions
and settings via app
Activate the app:
You have to have a code to activate the app. The
code is unique to each fan. Enter the code or scan it
using your phone. Your unique code is on the back
of the user guide and on the right leg of the motor
unit (Figure T).
T.
To Next Page
Loading...
Need help?
General
