Need help?Do you have a question about the Payne PG8DAA and is the answer not in the manual?
Procedure to prevent damage from electrostatic discharge during servicing.
Details on the location, size, and replacement of air filters.
Instructions for cleaning, lubricating, and servicing the blower motor and wheel.
Steps for cleaning soot and carbon deposits from the heat exchanger cells.
Schematic diagram illustrating the furnace's electrical connections and components.
Procedure to test individual furnace components via the control board.
Explanation of LED status codes and their meanings for fault diagnosis.
Step-by-step guide to diagnose and resolve furnace operational issues.
General| Fuel Type | Natural Gas |
|---|---|
| Input BTU | 40, 000 - 120, 000 |
| AFUE | 80% |
| Blower Motor | Multi-speed |
| Configuration | Upflow/Horizontal |
| Stages | Single Stage |
| Ignition Type | Hot Surface Ignition |
| Heat Exchanger Material | Aluminized Steel |
To Next Page