To Next PageTo Next Page
Need help?Do you have a question about the Payne PG8MAA024070AAJA and is the answer not in the manual?
Lists key operational and design characteristics of the furnace.
Details the warranty coverage for heat exchanger and other components.
Outlines critical safety precautions and hazards associated with furnace operation and installation.
Lists relevant national and local codes and standards for installation compliance.
Cautions users about sharp edges and burrs on sheet metal parts.
Details requirements for providing adequate air for proper furnace operation.
Emphasizes risks of CO poisoning due to improper combustion air supply.
Guidance on positioning the furnace relative to cooling coils to prevent damage.
Outlines methods for using indoor air for combustion and ventilation.
Specific steps for installing the furnace in an upflow configuration.
Instructions for installing leveling legs for furnace stability.
Information on filter placement and requirements for the furnace.
Specifics on wiring the 115-volt power supply to the furnace.
Steps for installing a power cord into the furnace's junction box.
Broad rules and guidelines applicable to all furnace venting installations.
Initial checks and preparations before starting the furnace adjustment process.
Cautions about potential damage from improper adjustment procedures.
General overview of the service and maintenance procedures.
Specific procedures for retrieving status codes from the control board.
Detailed operational sequence for the furnace during heating calls.
Operational sequence for the furnace when receiving a cooling call.
The initial step in the troubleshooting flowchart, checking basic power.
General