443B101/443B102 11
Manual 19854 Rev. D
ECN 50523
Command: SER#
Purpose: Returns the serial number of the card at the target location.
Response: The response string is 6 ASCII printable characters that correspond to the serial
number of the module at the location sent by the command.
Command String: XYCMMSER#
Description: X—Rack number of the target module (Range: ASCII printable characters, 0
through 3)
Y— Slot number of the target module. (Range: ASCII printable characters, 0
through 7)
CMM—Module type for the target. Specifying "CMM" in this argument
indicates the intention of any module type that may be found in Rack X, Slot Y.
(Range: 3 ASCII printable characters)
SER#— Commands target module to return its 6 character serial number.
Response String: ZZZZZZ
Description: These 6 ASCII printable characters are the serial number of the module at the
location sent by the command.
Example: Command String: “00CMMSER#”
Response String: “000204”
The serial number of the card in rack 0 and slot 0 is 000204.
To Next Page
Loading...