443B101/443B102 25
Manual 19854 Rev. D
ECN 50523
Command: TERM
Purpose: Terminates the automated drift nulling routine when in long time constant
charge mode.
Response: The module responds with a “0” to tell the calling process the command has
been received.
Command String: XYC02TERM
Description: X—Rack number of the target module (Range: ASCII printable characters, 0
through 3)
Y— Slot number of the target module. (Range: ASCII printable characters, 0
through 7)
C02— Module type for the target. Only type “C02” (443B102) can accept this
command since the 443B101 does not have long time constant.
TERM—Commands the module to terminate drift nulling.
Response String: “0”
Description: This return indicates that the command was received by the card.
Example: Command String: “04C02TERM”
Response String: “0”
The 443B102 in rack 0 and slot 4 is commanded to terminate the drift nulling
routine.
To Next Page
Loading...