Mainboard User’s Manual
PowerOn by
KBC
Wake up key
Wake up
password
If you enable this item, system can
automatically resume by pressing hot keys
on the keyboard or typing in the password.
You must enable the Keyboard Power On
jumper and use an ATX power supply in
order to use this feature.
PowerOn by
RTC Alarm /
Date / Hour /
Minute /
Second
The system can be turned off with a
software command. If you enable this item,
the system can automatically resume at a
fixed time based on the system’s RTC
(realtime clock). Use the items below this
one to set the date and time of the wake-up
alarm. You must use an ATX power supply
in order to use this feature.
To Next Page
Loading...
