Mainboard User’s Manual
Installing under Windows NT or Manual Installation
If you are under Windows NT, the auto-installing program doesn’t
work out; or you have to do the manual installation, please follow
this procedure while the Auto Setup screen pops out after inserting
the support CD-ROM:
1. Click the Browse CD button to bring up a file browser window.
You can find out the PATH.HTML; or click the ReadMe to
bring up a screen, and then click the Install Path at the bottom of
the screen to find out the PATH.HTML, too.
2. Find out your mainboard model name from the PATH.HTML.
Click the model name and obtain its correct driver directory.
3. Install each software in accordance with the corresponding
driver path.
Bundled Software Installation
All bundled software available on the CD-ROM is for users’
convenience. You can install bundled software as follows:
1. Click the Application button while the Auto Setup screen pops
out after inserting the support CD-ROM.
2. A software menu appears. Click the software you want to install.
3. Follow onscreen instructions to install the software program step
by step until finished.
To Previous Page
Loading...
