PCI EFP-500 User Manual

Safety in Practice
EFP-500
Endo-Flush
Endoscope Flushing Pump
Instruction Manual
CLEN218

PCI EFP-500 Specifications

Power

voltage	115 V
frequency	50/60 Hz
current	0.7 A

Weight and Dimensions

width	6.5 inches
depth	8.5 inches
height	8.25 inches
weight	11 lbs

Summary

Safety Precautions

Critical Electrical and Fluid Safety

Covers GFCI use, avoiding immersion, flammable liquids, and fluid exit precautions.

Personal Protective Equipment and Material Safety

Setting Up Your EFP-500

EFP-500 System Components

Wall Mounting Your EFP-500

Operation - Start-Up and Connections

Unit Start-Up Procedure

Endoscope and Hose Connections

Connecting Your Endoscope to the EFP-500

Inlet Hose and Detergent Container Setup

Channel Selection Process

Selecting Main and Optional Channels

Describes pressing the select button for the main or optional channels for proper flushing.

Flushing Procedures

Flushing with Detergent

Details the step-by-step process of flushing the endoscope channels with detergent.

Flushing with Water and Air

Flushing with Water

Explains the procedure for flushing the endoscope channels with clean water.

Flushing with Air

Describes the process of flushing the endoscope channels with air after water rinse.

Routine and System Maintenance

Daily and Monthly Maintenance Tasks

System Cleaning Procedures

Decontamination Cycle Procedures

Channel Assembly Decontamination

Details daily decontamination for channel assemblies using HLD or steam sterilization.

Inlet Hose and EFP-500 Decontamination

Outlines daily decontamination for the inlet hose and EFP-500 using HLD.

Flow Verification

Verifying Main and Special Channel Flow

Troubleshooting and FAQs

Troubleshooting Unit Not Running

Compatible Endoscopes