Installaon and Inial Start‐Up Instrucons
25
12. Refer to Waterway Neo 2100 Control secon for heang, filtraon cycles and funcon
13. Adjust water chemistry according to the instrucons provided in water chemistry guidelines secon.
14. View current water temp on the control panel and set to desired level. Water will heat approximately 1– 2 degrees
an hour. Times may vary.
15. Adjust water chemistry according to the instrucons provided in water chemistry guidelines secon.
16. Remove the swim spa cover from the box and place it on the swim spa. Pull down one of the straps on the swim spa
cover and hold latch against the cabinet side panel. To posion the lock correctly, have a second person hold the strap
ght on the opposite side of the swim spa cover. The swim spa cover must be ght. Do not place the latch over the
grooves of the cabinet fi nish. Remove the latch from the lock, aach the lock to the cabinet side panel with three #4
screws provided. Aach the other locks to the cabinet in the same manner. To lock the cover in place, insert the key
and turn it clockwise 1/4 turn. To unlock the latches, insert the key and turn it counterclockwise 1/4 turn. Always keep
locked when not in use. Keep the keys in a safe place, out of the reach of children.
To Next Page
Loading...
Need help?
General
