Operaon Systems—Waterway Neo 2100 Series Control, Synergy Models
34
SengScreens
RotateView:rotate the view 180°, the UP and DOWN buon also swap when rotated. With ROTATE VIEW highlighted press
MENU to enter ROTATE VIEW seng. Use UP/DOWN to select the desired seng and RETURN to exit and confirm the seng.
SpecialTemp:only available for authorized technicians
HeatMode:select STANDARD heang mode for most users or ENERGY SAVING mode (reduces polling water temperature) or
VACATION mode (set temp set to 50°F). With HEAT MODE highlighted press MENU to enter HEAT mode seng. Use UP/DOWN
to select the desired seng and RETURN to exit and confirm the seng.
FilterCycles:set up filter cycle start me, duraon and date for filtering the spa. For FILTER CYCLE 1 and 2, if duraon is set to zero
the system will do a purge cycle at the start me seng. With FILTER CYCLE highlighted press MENU to enter FILTER CYCLE
1,2,3,or 4 seng. Select a FILTER CYCLE and press MENU again to enter TIME/DURATION seng screen. In this screen, press
MENU to move between HOURS, MINUTES and DAYS seng; UP/DOWN to change values, RETURN to exit and confirm seng.
Date‐Time:set up date and me for spa. With DATE‐TIME highlighted press MENU to enter DATE‐TIME seng. In his screen,
pressing MENU will move and highlight various fields that can change the seng; UP/DOWN to change the values and RETURN to
exit and confirm the seng.
Degree F/C:displays spa temperature in Celsius or Fahrenheit. This opon is only available for 60HZ countries and automacally
displays Celsius for 50HZ. With DEGREE F/C highlighted press MENU to enter DEGREE F/C seng. Use UP/DOWN to select the
desired seng and RETURN to exit and confirm.
TimeDisplay:display spa me in AM/PM or 24 hours me. With TIME DISPLAY highlighted press MENU to enter TIME DISPLAY
seng. Use UP/DOWN to select the desired seng and RETURN to exit and confirm seng.
DevicesTimeout:only available for authorized technicians
PanelLock:locks all panel buons except MENU buon. With PANEL LOCK highlighted press MENU to enter PANEL LOCK
seng. Use UP/DOWN to select the desired seng and RETURN to exit and confirm.
TempLock:locks TEMPERATURE seng with UP/DOWN buons. With TEMP LOCK highlighted press MENU to enter TEMP
LOCK seng. Use UP/DOWN to select the desired seng and RETURN to exit and confirm.
ServiceMode:only available for authorized technicians
DemoMode:to demonstrate all device capabilies of the spa. With DEMO MODE highlighted press MENU to enter MODE
seng. Use UP/DOWN to select the desired seng and RETURN to exit and confirm.
GeneralInformaon:displays general informaon of the spa. With GENERAL INFORMATION highlighted press MENU to enter
GENERAL INFORMATION menu. Use UP/DOWN to view different pages and informaon and RETURN to exit and confirm.
Languages:to select various languages for spa display. With LANGUAGES highlighted press MENU to enter and select a specific
language. Use UP/DOWN to select the desired seng and RETURN to exit and confirm.
SerenityMode:to turn off all outputs and provide a quiet me seng. With SERENITY MODE highlighted press MENU to enter
and select a specific me. Use UP/DOWN to select the desire me seng. Press MENU again to navigate to EXIT/START. Select the
desired opon and RETURN to exit and confirm seng.
EnergyInterval:only available on non‐circ systems. With ENERGY INTERVAL highlighted press MENU to enter ENERGY INTERVAL
seng. Use UP/DOWN to select the desired minutes seng and RETURN to exit and confirm.
SilentTime:only available on non‐circ systems. Set up me for no polling. With SILENT TIME highlighted press MENU to enter
SILENT TIME seng. In this screen, pressing MENU will move and highlight various fields that can change the seng; UP/DOWN
to change the values and RETURN to exit and confirm seng.
CleanerCycle:only available on non‐circ systems. To turn on filtraon aer using the spa for short cleaning period. With CLEANER
CYCLE highlight press MENU to enter and select a specific duraon. Use UP/DOWN to select the desired me seng. Press MENU
again to navigate to EXIT/START/ Select the desired opon and RETURN to exit and confirm.
To Next Page
Loading...
Need help?
General
