PDL UD3-10.5 - User Manual

Microdrive Series Instruction Manual
4201-109 Rev I
MICRODRIVE SERIES
AC MOTOR SPEED CONTROLLER
INSTRUCTION MANUAL
4201-109 REV I
Leaders in AC Motor Controls
Head Office:
81 Austin Street
P.O. Box 741
Napier
New Zealand
Tel.: +64-6-843-5855
Fax: +64-6-843-5185
4201-003 Rev A Page 1 of 12

PDL UD3-10.5 Specifications

General

Brand	PDL
Model	UD3-10.5
Category	Controller
Language	English

Summary

IMPORTANT NOTES

MICRODRIVE-3 (UD3) SPECIFICATIONS

UD3 PROTECTION

Details supply, current limit, short-circuited load, thermal model, and PCB faults.

MICRODRIVE-I (UDI) SPECIFICATIONS

INPUT

Specifies input voltage, supply range, phase, frequency, and power factor.

OUTPUT

Details current overload, power, voltage, current limits, and frequency.

UDI PROTECTION

MOTOR PROTECTION

Covers stall protection, thermal model, and overload.

CONTROL PANEL

CONTROL FEATURES

PART 1 THE STANDARD MICRODRIVE

1.1 APPLICATION RECOMMENDATIONS

1.2 INSTALLATION

Covers installation procedures and considerations for the Microdrive.

1.3 THE CONTROL PANEL

1.5 COMMISSIONING THE MICRODRIVE

PART 2 THE FULL FEATURES OF THE MICRODRIVE

2.1 INTRODUCTION TO THE FULL FEATURES OF THE MICRODRIVE

2.2 CONTROL INPUT;OUTPUT FUNCTIONAL DESCRIPTION AND SPECIFICATION

Explains the functionality and specifications of control inputs and outputs.

2.3 SUMMARY OF THE FULL SCREEN CONTROLS

2.4 DETAIL OF THE FULL SCREEN CONTROLS

APPENDIX 4: USING THE MICRODRIVE AS A PROCESS CONTROLLER

4 A: GENERAL NOTES

4 B: APPLICATION EXAMPLE - TACHO FEEDBACK

Illustrates using Tacho feedback for speed regulation with wiring configuration.

4 C: APPLICATION EXAMPLE - CONSTANT PRESSURE PUMPING

APPENDIX 6: TORQUE CONTROL USING THE MICRODRIVE CURRENT LIMIT

6 A: GENERAL NOTES

6 B: APPLICATION EXAMPLE - CONSTANT TENSION WINDER

Illustrates torque control for constant tension winding with wiring.