PDL MICRODRIVE-3 - User Manual

Microdrive Series Instruction Manual
4201-109 Rev I
MICRODRIVE SERIES
AC MOTOR SPEED CONTROLLER
INSTRUCTION MANUAL
4201-109 REV I
Leaders in AC Motor Controls
Head Office:
81 Austin Street
P.O. Box 741
Napier
New Zealand
Tel.: +64-6-843-5855
Fax: +64-6-843-5185
4201-003 Rev A Page 1 of 12

PDL MICRODRIVE-3 Specifications

General

Brand	PDL
Model	MICRODRIVE-3
Category	Controller
Language	English

Summary

IMPORTANT NOTES

WARNING:

Safety warnings for operating and servicing the Microdrive.

MICRODRIVE-3 (UD3) SPECIFICATIONS

MICRODRIVE-I (UDi) SPECIFICATIONS

PART 1 THE STANDARD MICRODRIVE

1.5 COMMISSIONING THE MICRODRIVE

Procedures for commissioning the Microdrive, including safety precautions and test runs.

PART 2 THE FULL FEATURES OF THE MICRODRIVE

2.2 CONTROL INPUT;OUTPUT FUNCTIONAL DESCRIPTION AND SPECIFICATION

Detailed description of control inputs and outputs, including specifications and functions.

APPENDIX 1 A: COMMISSIONING CONFIGURATION RECORD - SHORT MENU

APPENDIX 1 B: COMMISSIONING CONFIGURATION RECORD - FULL MENU

APPENDIX 1 C: COMMISSIONING WIRING CONFIGURATION RECORD

APPENDIX 3: LOCAL KEYBOARD OPERATION

APPENDIX 4: USING THE MICRODRIVE AS A PROCESS CONTROLLER

4 B: APPLICATION EXAMPLE - TACHO FEEDBACK

Example of using the Microdrive with a Tacho feedback system for speed control.

4 C: APPLICATION EXAMPLE - CONSTANT PRESSURE PUMPING

Example demonstrating constant pressure pumping control using the Microdrive.

APPENDIX 5: MICRODRIVE-3 OPERATION FROM NON-STANDARD SUPPLIES

5 B: UD3 SINGLE PHASE AC SUPPLY

Information on operating the Microdrive-3 from a single-phase AC supply and its limitations.

APPENDIX 6: TORQUE CONTROL USING THE MICRODRIVE CURRENT LIMIT

6 B: APPLICATION EXAMPLE - CONSTANT TENSION WINDER