Microdrive Series Instruction Manual
4201-109 Rev I
WARNING:
The Microdrive operates from HIGH ENERGY ELECTRICAL SUPPLIES.
Stored charge is present after switch off.
Due to the high leakage currents inherent to AC drives, earth connection
of both the motor and the Microdrive is essential before connection to the
supply.
Service only by qualified personnel.
Always isolate and allow to discharge before servicing.
Always wear safety glasses if operating with the cover removed.
Never work on live equipment alone.
Observe all recommended practices.
Ensure that the Microdrive is not mounted in an adverse environment.
The Microdrive contains static sensitive printed circuit boards. Use static safe
procedures when handling these boards.
Understanding of the equipment is the key to safe and efficient use please
read this manual thoroughly.
4201-003 Rev A
Page 7 of 12
IMPORTANT NOTES
To Next Page
Loading...
Need help?
General
