www.pdr-rework.com
Worldwide Technical Support
This product was manufactured by PDR, UK and is supplied by a worldwide network of professional distributors who
provide a full range of sales, local service and support services.
For latest information on Technical Support, new products, upgrades or who to call for assistance contact us at PDR
Europe, Asia, Africa, Middle-East and South America – PDR
Email: support@pdr.co.uk
Website: www.pdr-rework.com
Phone: +44 1293 614000
Fax: +44 1293 613600
North and Central America – PDR America
Email: support@pdr-america.com
Website: www.pdr-rework.com
Phone: USA (530) 676 6262
Fax: USA (530) 676 6265
Introduction
Firstly, prior to use, we recommend that the system be professionally installed and commissioned by a
certified PDR representative. This manual is structured to assist a technician with the operation and maintenance
of the PDR equipment. It contains a technical description to enable the reader to understand the design features of
the equipment. The safety section of the manual explains the inherent dangers presented by any type of desoldering
soldering equipment, and warnings to minimise the risk of injury through ignorance.
Terminology
The following lists terms and abbreviations used in this manual, which may need explanation:
Term Explanation
AC Alternating current as found in ‘mains’ supplies
IR Infra-red
Low Voltage Voltage below 24 volts
PCB Printed circuit board
RF Radio Frequency
SMT Surface Mount Technology
SMD Surface Mount Device
To Next Page
Loading...
Need help?
General